Created on the 2 X Arri Skypanels LED with Stands
If we have your product in stock, you can collect it on the same day from Sydney and Melbourne. If it is already hired out, we will let you know when it's ready for collection.
When you're ready to submit your Hire Request form online, we will be in touch with product availability information.
If you are a new customer, to get you started on your new hire we will need to set you up as a customer on the system. These forms will be sent to you when you submit your Hire Request.
The ARRI Skypanel sets a new standard for the photographic industry with it's compact design and exceptionally bright, high quality LED light.
More then a decade of research and development has resulted in the SkyPanel with a design focused on form, color, beam field and output to achieve the best results possible.
The SkyPanel is one of the brightest and most versatile soft lights on the market with features from ARRI’s successful L-Series LED Fresnels. The SkyPanel ‘C’ (Color) versions have excellent color rendition over the entire range and are fully tuneable; correlated color temperature is adjustable between 2,800 K and 10,000 K. Full plus and minus green correction can be achieved with just a turn of a knob. In addition to CCT adjustments, other control options are available such as: hue and saturation, gel selection, RGBW, source matching, x,y coordinates, and 16 professional lighting effects programmed into every fixture.
The remote phosphor versions of SkyPanel are also available and have a lower price point. Different color temperature panels are available, including 2,700 K; 3,200 K; 4,300 K; 5,600 K; 6,500 K and 10,000 K. A chroma green phosphor panel is available for green screen lighting.
Light Aperture / Lens Diameter in mm
Light Aperture / Lens Diameter in inch
Weight in kg net*
Lamphead Voltage Input
Lamphead Power Connection
Battery DC Voltage Range
Battery Mode Light Output
Color Temperature Tolerance
Remote Device Management (RDM)
Software / Mini-USB Interface
Ambient Temperature Operation
Protection Class / IP Rating
Estimated LED Lifetime (L70)
Estimated Color Shift Over Lifetime (CCT)
Power Supply Unit
Power Supply Input Range
Power Supply Output Range
Power Input Connection
Power Output Connection
Weight in lbs
Measurements (HxWxL) in mm*
Measurements (HxWxL) in inch*
Soft Diffusion Panel
645 x 300 mm
25.4 x 11.8"
115° (Half Peak Angle)
Manual Version: approx. 13 kg
Aluminium Yoke, High-Strength Tilt Lock / Steel Yoke, Pole Operation for Pan & Tilt
28 mm Spigot (Junior Pin)
48 V DC
420 W Nominal, 450 W Maximum
Male 3-Pin XLR - 15 Amp (Pin 1: Negative / Pin 2: Positive)
Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)
23 to 36 V DC
50 % of total output
2,800 K to 10,000 K continuously variable correlated color temperature
Full RGB+W Color Gamut with Hue and Saturation Control
+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
CRI Average > 95, TLCI Average > 90
Continuously adjustable (Full Minusgreen to Full Plusgreen)
0 to 100 % continuous
On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net
Not integrated, via SkyLink
DMX Setup, Hour Counter and Standard RDM Commands
Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac USB-A: Software Upgrade via flash drive
-20 to +45° C (-4 to +113° F)
III / IP 20
+/- 5 %
CE, CB, ENEC, cNRTLus, FCC, PSE
110 to 240 V ~, 50/60 Hz
48 V DC
powerCON TRUE1 (Bare Ends / Schuko / Edison)
Female 3-Pin XLR to 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
approx. 4 kg
approx. 8 lbs
91 x 191 x 383 mm
3.6 x 7.5 x 15.1"
On-Board On/Off Switch
SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter
CE, CB, ENEC, cNRTLus, PSE