Angenieux EZ-1 Cinema Lens (Super35 and Full-Frame)

Hire From $440.00 per day

Angenieux EZ-1 Cinema Lens (Super35 and Full-Frame)

Hire From $440.00 per day
$0.00
  • This item is outsourced, please check for availability
  • Covers S35 3-Perf Sensor Size
  • 3x Zoom Ratio
  • PL Mount with Optional Mounts Available
  • f/1.9, T2.0 Aperture
  • 2' Minimum Focus Distance
  • 114mm Front Diameter
  • 0.8 Gear Teeth on Focus, Iris, and Zoom
  • Replacement Rear Lens-Group
  • Covers Full-Frame/VistaVision
Pickup Info

If we have your product in stock, you can collect it on the same day from Sydney and Melbourne. If it is already hired out, we will let you know when it's ready for collection.

Availability Info

When you're ready to submit your Hire Request form online, we will be in touch with product availability information. 

Finance Policy
Forms

If you are a new customer, to get you started on your new hire we will need to set you up as a customer on the system. These forms will be sent to you when you submit your Hire Request.

This item is outsourced, please check for availability.

The EZ-1 30 to 90mm Cinema Lens Pack from Angenieux includes the PL mount version of the 30 to 90mm EZ-1 zoom lens, with both the Super35 and FF/VistaVision rear lens-groups.

 

The lens achieves T2.0 in Super35 and T3.0 in full-frame/VistaVision. The physical length of the lens, minimum focus distance and 3x zoom ratio remain unaffected when swapping between the rear lens groups. However, the full-frame rear lens group does change the lens from a 30 to 90mm zoom that covers Super35, to a 45 to 135mm zoom that covers the full-frame/VistaVision aperture.

 

The lens itself has 3 manual lens control rings: focus, iris, and zoom. Each ring features cine-style 0.8 MOD gear teeth, for compatibility with follow focus units and lens control motors. The 114mm front diameter allows you to work with a wide variety of rod supported matte boxes.

 

Angenieux's EZ-1 30-90mm S35 Cinema Lens with PL Mount is a fast zoom for 3-perf Super 35mm sized sensors. This version of the lens ships with a PL mount and the Super 35 rear optical assembly. Optional lens mounts allow you to swap the lens mount from PL to Sony E or Canon EF. It features a T2.0 aperture and focuses down to 2' in front of the image plane while weighing in at only 4.7 pounds. A removable support foot can be repositioned for when you need to rotate your lens off of a standard mounting orientation.

 

Interchangeable Lens Mounts

The PL mount can be swapped with available (not included) E or EF lens mounts.

Losing only 1/10 of a stop within the lens, the EZ-1 is extremely efficient. The fast T2.0 maximum aperture in Super 35mm matches the maximum aperture of many standard prime lenses for Super 35mm. This allows you to create more consistent images through lighting to a lower illumination level than would normally be required for many zooms, meaning you won’t have to relight the scene as is often the case when moving from primes to slower zoom lenses.

 

Manual Lens Control Rings

Featuring independent manual control rings for focus, iris, and zoom. Each control ring incorporates industry standard 0.8 lens gear teeth.

 

114mm Front Diameter

The 114mm front diameter of the lens is a common diameter compatible with cinema-style matte boxes. The EZ-1 shares the same 114mm front common to the Angenieux OPTIMO lens series, allowing you to easily share matte boxes between the EZ-1 and the OPTIMO lenses.

 

Temperature Stability

The EZ series of lenses are designed and built to compensate for temperature drifts, which helps reduce the need to recollimate the lens.

 

Angenieux EZ-1 Zoom Full-Frame Rear Lens-Group

The EZ-1 Zoom Full-Frame Rear Lens-Group from Angenieux converts the Angenieux EZ-1 PL-mount zoom lens for use with full frame or VistaVison cameras. This rear-element group converts the Angenieux EZ-1 Zoom's focal length from 30-90mm to 45-135mm. The aperture of the lens changes from T2.0 (f/1.9) to T3.0 (f/2.8).

Accessories