Arri Cine Shoulder Rig for C300MKII/C200

Hire From $136.00 per day
brand logo

Arri Cine Shoulder Rig for C300MKII/C200

Hire From $136.00 per day
  • For Canon C300 MK II
  • BP-8 bridge plate set (19mm)
  • 3/8in accessory adapter, 18, 65mm square
  • Support rods 340mm, Ø15mm/li>
  • Cine plate C300 MKII
  • Shoulder pad CSP-1
  • Top plate C300 MKII
  • Centre camera handle CCH-2
Pickup Info

If we have your product in stock, you can collect it on the same day from Sydney and Melbourne. If it is already hired out, we will let you know when it's ready for collection.

Availability Info

When you're ready to submit your Hire Request form online, we will be in touch with product availability information. 

Finance Policy

If you are a new customer, to get you started on your new hire we will need to set you up as a customer on the system. These forms will be sent to you when you submit your Hire Request.

The extensive Pro Cine Set with BP-8 for Canon C300 Mk II from ARRI provides both lightweight, and tripod plate-based support for your Canon EOS C300 Mk II, C300, or C500 camera.

This set includes a cine adapter plate, shoulder pad, two-piece BP-8 bridge plate adapter, a pair of 15mm rods, a pair of 19mm rods, top cheese plate, CCH2 carrying handle, and a 3/8"-16 accessory shoe adapter. Mount 19mm rod-based accessories, and balance the camera on your tripod using the cine plate, the BP-8 bridge plate, and the 19mm rods.

Alternatively, combine the cine plate, shoulder mount, and 15mm rods for a shoulder-mounted rig.

Cine Plate C300 MkII
Offers front and rear 15mm LWS integrated rod consoles, a pair of ARRI rosettes and direct compatibility to studio bridge plates such as SBP-1, BP-8 or BP-9. Compatible with following Canon Cameras: Canon EOS 200 (with additional Adapter Plate for Canon C200), Canon EOS 300, Canon EOS 300 MkII, Canon EOS 500.

Support Rods 340mm, Ø15mm
One pair Ø 15 mm, stainless steel, lightweight

Center Camera Handle CCH-2
Compatible with all generations ALEXA M, ALEXA Mini, AMIRA through the use of adapter plate UAP-2 and many third party cameras equipped with ARRI PCA.

Top Plate C300 MkII
Low-mode plate fitted with an integrated 15mm LWS rod console that provides room for handle and accessories. Compatible with Canon EOS 300 MkII and with the original Canon top handle.

Shoulder Pad CSP-1
This shoulder pad clamps on 15 mm LWS rods forward or backwards of the baseplate and can be adjusted to suit best balance on the shoulder. The camera rig is able to rest on a flat surface without its shoulder pad coming in contact to the ground.

3/8in Accessory Adapter, 18, 65mm square
Attaches via 3/8 inch UNC thread with two locating pins for stability. For use with ARRI 18,65mm shoe-mounted accessories.